www.druckgeraete-online.de

Leitlinien zur Druckgeräterichtlinie 2014/68/EU

A. Anwendungsbereich und Ausschlüsse

B. Einstufung und Kategorien

C. Baugruppen

D. Konformiätsbewertungsverfahren

E. Auslegung der grundlegenden Sicherheitsanforderungen zum Entwurf

F. Auslegung der grundlegenden Sicherheitsanforderungen zur Herstellung

G. Auslegung der grundlegenden Sicherheitsanforderungen zu Werkstoffen

H. Auslegung der anderen grundlegenden Sicherheitsanforderungen

I. Verschiedenes

J. Querschnittsfragen
Status of Leitlinien:
The PED Guidelines are not a legally binding interpretation of the Directive. The legally binding text remains that of the Directive. However, the PED Guidelines represent a reference for ensuring consistent application of the Directive. They represent, unless indicated differently in the respective guideline text, the unanimous opinion of the Member States
.

I. Verschiedenes

Leitlinie

Akzeptiert
durch WGP

Frage

Leitlinie
I-01
08.01.2016

What is to be understood by "sound engineering practice"?

Leitlinie
I-02
15.03.2016 What does “material recognised as being safe to use before 29 November 1999” in Article 15, first paragraph mean ?
Leitlinie
I-03
15.03.2016 Is the approval of a material manufacturer part of the European Approval for Materials procedure for “a material recognised as being safe to use before 29 November 1999” ?
Leitlinie
I-04
15.03.2016 May a European Approval for Materials for a “material recognised as being safe to use before 29 November 1999”, be restricted to one or more material manufacturers?
Leitlinie
I-05
08.01.2016 In which conditions is it possible to use a document other than a harmonised standard (national standard, professional code or private technical document) for the design and manufacture of pressure equipment for the application of PED ?
Leitlinie
I-06
15.03.2016 Is it possible to use partially one or more harmonised standards, codes or specifications to design and manufacture a pressure equipment conform to the Pressure Equipment Directive ?
Leitlinie
I-07
15.03.2016 Under what circumstances shall safety accessories placed on the market not bear the CE marking according to the PED ?
Leitlinie
I-08
08.01.2016 Conformity with the PED is required for some piping per Article 4 paragraph 1 (c), which are part of an industrial installation. May all such piping for a given installation be covered by a single CE marking ?
Leitlinie
I-09
15.03.2016 If an item of pressure equipment is covered by Article 4 paragraph 3, and there exists an EN product standard for this type of pressure equipment, does this mean that the EN standard explains the meaning of the sound engineering practice?
Leitlinie
I-10
08.01.2016 When performing an EU-type examination – production type or an EU-Type examination – design type using particular appraisals for materials, are such appraisals applicable to all items of pressure equipment covered by the examination ?
Leitlinie
I-11
15.03.2016 When performing a particular material appraisal for materials recognized as being safe to use before 29.11.1999, shall the existing data for these materials be taken into account when assessing the suitability of this material?
Leitlinie
I-12
08.01.2016 Do the requirements of Annex I Section 4 regarding materials also apply to pressure equipment described in Article 4.3 (Sound engineering practice)?
Leitlinie
I-13
08.01.2016 What are the formal requirements of a particular material appraisal (PMA)?
Leitlinie
I-14
08.01.2016 May the specific assessment (referred in the Annex I section 4.2 c) be carried out by a user inspectorate as part of the conformity assessment of pressure equipment based on modules A2, C2, F or G ?
Leitlinie
I-15
15.03.2016 A user places an order for Pressure Equipment on a manufacturer in Member State 'A', where the Member State has chosen not to implement Article 16; but the Pressure Equipment is intended to be put into service as part of an industrial installation in Member State 'B', where Article 16 is implemented. May Member State 'A' refuse to allow the user's inspectorate, which has been authorized according to Article 16 in another Member State, to operate on its territory, thus preventing the User Inspectorate from undertaking conformity assessment of the Pressure Equipment?
Leitlinie
I-16
15.03.2016 Must a CE-marked item of pressure equipment, or an assembly, be supplied with an EU declaration of conformity, when it is placed on the market ?
Leitlinie
I-17
15.03.2016 How shall a manufacturer established outside the European Economic Area (EEA) fulfil the requirement of the sound engineering practice (SEP) of a Member State ?
Leitlinie
I-18
08.01.2016 Article 5 of PED provides for the making available on the market or putting into service of CE-marked pressure equipment or assemblies which comply with the directive. Under what circumstances can the application of national regulations (e.g. by public authorities or private authorised bodies) on periodic testing constitute a barrier to trade?
Leitlinie
I-19
15.03.2016 What information should be supplied with an item of pressure equipment, or an assembly, which falls under article 4, paragraph 3 (sound engineering practice, SEP) when it is placed on the market, to indicate that it complies with the provisions of article 4, paragraph 3 ?
Leitlinie
I-20
15.03.2016 Are national requirements additional to the Pressure Equipment Directive (PED) for the design, conformity assessment and installation of safety systems of CE-marked boilers for generating steam or superheated water intended for operation without continuous supervision permissible?
Leitlinie
I-21
08.01.2016 Article 5 paragraph 3 of the Pressure Equipment Directive allows Member States to require the information for pressure equipment described in Annex 1 Sections 3.3 and 3.4 to be provided in the official language(s) of the country in which the equipment or assembly reaches the final user. If so required, does this impose the task of translating on the manufacturer?
Leitlinie
I-22
15.03.2016 In which language must the EU declaration of conformity be written?
Leitlinie
I-23
08.01.2016 What aspects must not be assessed during inspections under national legislation before putting into service products falling in the scope of the Pressure Equipment Directive (PED)?
Leitlinie
I-24
15.03.2016 What additional requirements for the design, manufacture and assessment of pressure equipment and assemblies covered by the Pressure Equipment Directive (PED) containing explosive/inflammable fluids are allowed in national regulations in addition to the requirements of the PED?
     



Oben